Residential Energy Calculation Methods
Formulas and assumptions behind our home energy audit, insulation, home office, and water heater calculators.
Home energy audit savings
This calculator ties the value of a home energy audit to three inputs: your current annual energy bill, the percentage you expect to save by acting on the audit’s recommendations, and what the audit itself costs.
Data sources: U.S. Department of Energy (DOE) home energy audit savings data and recommendations; average professional home energy audit cost from 2026 industry data; blower door testing and infrared imaging standards (ASTM E779, ASTM E1186); ductwork leakage impact from HVAC system research; air sealing prevalence data from residential energy efficiency studies.
Home insulation savings
This calculator ties the dollar savings from an attic insulation upgrade to four inputs: your current attic R-value, the upgraded R-value, your annual heating and cooling cost, and the share of that cost attributable to insulation. Heat Loss Reduction (%) = (1 − (Current Attic R-Value ÷ Upgraded R-Value)) × 100, where R-value is a material's thermal resistance — higher R means less heat passes through for a given temperature difference, so going from R-19 to R-49 cuts heat loss through the attic by (1 − (19 ÷ 49)) × 100 = 61.2%. Addressable HVAC Cost ($/year) = Annual Heating & Cooling Cost ($) × (Percentage of HVAC Cost Attributable to Insulation (%) ÷ 100); at a $1,500 annual HVAC cost and a 40% insulation share, that is 1,500 × 0.40 = $600/year — the portion of your bill that flows through attic and insulation-related pathways, with the rest coming from walls, windows, air leaks, and ductwork. Estimated Annual Savings ($/year) = Addressable HVAC Cost ($) × (Heat Loss Reduction (%) ÷ 100); at $600 addressable cost and 61.2% heat loss reduction, that is 600 × 0.612 = $367.20/year — roughly 24% of the original $1,500 bill, squarely within the DOE's commonly cited 10-50% savings range for insulation upgrades. The insulation share percentage is the single most important input for a realistic estimate, because it captures the fact that the attic is only one of several heat-loss pathways. Data sources: ENERGY STAR attic insulation recommendations by climate zone; DOE heating/cooling savings estimates from insulation upgrades; thermal resistance (R-value) standards from ASTM C168; heat loss pathway analysis from residential energy efficiency research; air leakage prevalence data from building science studies.
Home office energy use
This calculator ties the annual electricity cost of a home office to six inputs: computer wattage, monitor count, hours used per day, working days per week, other equipment power, and your electricity price. Total Equipment Power (W) = Computer Wattage (W) + (Number of Monitors × 30 W) + Other Equipment Power (W), where each monitor is assumed to draw roughly 30 W (a typical LCD/LED figure); at a 150 W desktop, 2 monitors, and 30 W of peripherals, that is 150 + (2 × 30) + 30 = 240 W. Daily Energy Use (kWh) = (Total Equipment Power (W) × Hours Used per Day) ÷ 1,000 — watts × hours gives watt-hours, and dividing by 1,000 converts to the kilowatt-hours your utility bills; at 240 W and 8 hours, that is (240 × 8) ÷ 1,000 = 1.92 kWh/day. Annual Energy Use (kWh) = Daily Energy Use (kWh) × Working Days per Week × 52, scaling the daily figure to a full year of working weeks; at 1.92 kWh/day and 5 working days, that is 1.92 × 5 × 52 = 499.2 kWh/year. Annual Cost ($/year) = Annual Energy Use (kWh) × Electricity Price ($/kWh); at 499.2 kWh and $0.17/kWh, that is 499.2 × 0.17 = $84.86/year. The model covers equipment electricity only — not the typically larger cost of heating, cooling, and lighting the space itself — and monitor/computer wattage varies with size, workload, and brightness, so treat the 30 W/monitor and 150 W desktop figures as planning averages. Data sources: desktop and laptop power consumption from equipment manufacturer specifications and energy efficiency studies; monitor wattage from typical LCD/LED display power ratings; home office equipment power draw from DOE and EPA energy guides; average U.S. residential electricity rates from EIA data.
Water heater energy input by type
This calculator compares the annual energy input different water heater technologies need to deliver the same amount of hot water, tying the result to household demand and each type’s Uniform Energy Factor (UEF). Three quantities tie the calculation together. Temperature Rise (°F) = Water Heater Setpoint Temperature (°F) − Incoming Water Temperature (°F); at a 120°F setpoint and 50°F incoming water, that is 120 − 50 = 70°F. Colder groundwater (common in northern climates) raises the temperature rise and therefore the energy required. Annual Thermal Energy Needed (kWh) = (Daily Hot Water Usage (gallons) × 8.34 × Temperature Rise (°F) × 365) ÷ 3,412. The 8.34 factor is the weight of one gallon of water in pounds, and one BTU raises one pound of water by one degree Fahrenheit, so daily gallons × 8.34 × temperature rise gives daily thermal energy in BTU; multiplying by 365 scales it to a year and dividing by 3,412 converts BTU to kilowatt-hours (1 kWh = 3,412 BTU). At 60 gallons/day and a 70°F rise, that is (60 × 8.34 × 70 × 365) ÷ 3,412 = 3,747 kWh of thermal energy the household needs each year, regardless of water heater type. Annual Energy Input Required (kWh-equivalent) = Annual Thermal Energy Needed (kWh) ÷ UEF (Uniform Energy Factor). UEF is the DOE efficiency rating — the ratio of usable hot water energy delivered to the energy the water heater consumes — so dividing the thermal energy needed by UEF gives the energy the heater must draw from its fuel or electricity source. At 3,747 kWh of thermal energy and a UEF of 0.92 (a typical electric resistance storage heater), that is 3,747 ÷ 0.92 = 4,073 kWh-equivalent; the same 3,747 kWh delivered by a heat pump water heater at UEF 3.5 needs only 3,747 ÷ 3.5 = 1,071 kWh, roughly a 4x difference for identical hot water output. UEF values are typical current-model ratings from DOE and ENERGY STAR; real-world efficiency varies with installation conditions and ambient temperature (heat pump water heaters perform best in moderate-temperature spaces). This calculator reports energy input only and does not convert to dollars — use the Water Heater Energy Cost Calculator for that. Data sources: DOE Uniform Energy Factor (UEF) standards; ENERGY STAR and manufacturer efficiency ratings; ASHRAE thermal energy calculations; DOE and utility heat pump water heater performance studies; USGS groundwater temperature data by region.