Waste-to-Energy Calculation Methods
Formulas and assumptions behind our waste-to-energy output, cost, emissions, and tipping fee calculators.
Mass-burn vs. gasification output (WTE technology comparison)
This calculator compares the annual electricity output of the two dominant thermal waste-to-energy technologies applied to the same waste stream, tying three inputs together: the waste processed in tons per year, the mass-burn output rate in kWh per ton, and the gasification output rate in kWh per ton.
Data sources: mass-burn WTE technology specifications and output rates from EPA waste-to-energy facility data and industry standards; gasification WTE technology performance data from pilot projects and commercial installations; WTE technology comparison studies from NREL and waste management research; commercial operating history and reliability data from U.S. WTE facility performance reports and industry case studies.
Waste composition & heating value (blended MSW heating value)
This calculator blends a municipal solid waste composition into a single as-received heating value in Btu/lb, tying five inputs together: the percentage by weight of paper/cardboard, plastics, food waste, yard waste, and other/residual material.
Data sources: waste composition data from EPA municipal solid waste characterization studies and regional waste stream analysis; heating values by material type from EPA waste-to-energy facility data, NREL biomass and waste energy research, and combustion engineering references; moisture content effects on heating value from thermodynamic principles and WTE facility performance data; typical U.S. MSW composition from EPA waste generation and characterization reports; regional waste stream variation data from state and local waste management agencies.
Waste stream availability (population, diversion & WTE capacity utilization)
This calculator estimates whether a service area's waste stream can supply a target waste-to-energy facility, tying four inputs together: the service area population, the per-capita waste generation rate, the waste diversion rate, and the target WTE facility capacity.
Data sources: EPA municipal solid waste generation rates and per-capita waste data from EPA waste generation and characterization reports; waste diversion rate data from EPA recycling and composting statistics; WTE facility capacity and waste supply requirements from utility-scale WTE project case studies; waste supply contract structures from WTE project finance and development literature; regional waste generation variation from state and local waste management agencies and EPA regional data.
WTE plant capital cost (capacity × cost per daily ton)
This calculator estimates the total capital cost of a waste-to-energy mass-burn facility, tying two inputs together: the plant capacity in tons per day and the capital cost per TPD. One quantity ties the calculation together. Total Capital Cost ($) = Plant Capacity (tons per day, TPD) × Capital Cost per TPD ($/TPD).
Data sources: WTE facility capital cost data from real-world mass-burn project case studies and industry reports; Palm Beach County Renewable Energy Facility 2 cost and capacity data from public project records and case studies; economies of scale analysis from WTE project cost benchmarking studies; capital cost per TPD figures from NREL waste-to-energy technology cost analysis and utility-scale WTE project data; air pollution control cost share from WTE facility design and engineering reports; permitting and construction timeline data from WTE project development case studies.
WTE emissions & carbon intensity (biogenic vs. fossil CO2 split)
This calculator splits a waste-to-energy facility's gross CO2 emissions into biogenic and fossil shares and reports the fossil emission rate per megawatt-hour, tying four inputs together: the waste processed, the gross CO2 emission factor, the biogenic carbon share, and the annual electrical output.
Data sources: EPA WTE emissions data and gross CO2 emission factors from EPA waste-to-energy facility performance reports; biogenic vs. fossil carbon accounting from EPA's WARM (Waste Reduction Model) methodology and lifecycle assessment standards; biogenic carbon share estimates from waste composition studies and EPA MSW characterization data; fossil CO2 emission rates from WTE facility performance data and lifecycle assessment studies; U.S. grid average carbon intensity from EPA eGRID database and grid operator reports; methane global warming potential from IPCC climate science reports and EPA greenhouse gas inventory methodology.
WTE tipping fee revenue (waste processed × gate rate)
This calculator estimates the annual tipping fee (gate fee) revenue a waste-to-energy facility earns from the waste it processes, tying two inputs together: the annual waste processed in tons per year and the tipping fee in dollars per ton.
Data sources: EREF 2024 national tipping fee survey data on WTE-state and non-WTE-state landfill gate rates; U.S. landfill national mean tipping fee from EPA and EREF waste management cost data; regional tipping fee variation from state waste management agencies and landfill operator surveys; WTE facility revenue structure and financing models from project case studies and waste-to-energy industry literature; put-or-pay waste supply contract structures from WTE project finance documentation.
WTE vs. landfill diversion (net GHG reduction)
This calculator compares the greenhouse gas emissions of landfilling a ton of waste against diverting that same ton to a waste-to-energy facility, tying three inputs together: the waste diverted to WTE in tons per year, the landfill emission factor in metric tons CO2e per ton, and the WTE net emission factor in metric tons CO2e per ton.
Data sources: EPA WARM (Waste Reduction Model) methodology and landfill lifecycle emissions factors; landfill methane generation and gas capture data from EPA landfill gas emissions inventory and state environmental agency reports; WTE net lifecycle emissions from EPA waste-to-energy facility data and lifecycle assessment studies; methane global warming potential from IPCC climate science reports; landfill gas capture rate data from EPA landfill gas utilization reports and state waste management agencies; WTE vs. landfill comparison studies from NREL and waste management research literature.