ASIC Miner Profitability Calculator
Estimate what a Bitcoin ASIC actually earns after power and pool fees. Pick a miner preset (or enter custom hashrate and power), set today's BTC price and network hashrate, and your electricity rate to see daily revenue, net profit, margin, and the breakeven electricity price where mining stops paying.
your share of 144 blocks
gross BTC × BTC price
82.3 kWh × rate
after pool fee + power
net/day × 30.4
net/day × 365
net ÷ revenue
net = $0 at this rate
| Gross BTC / day | 0.0001444BTC |
| Revenue / day | $12.28 |
| Pool fee / day | $0.25 |
| Energy / day | 82.3kWh |
| Power cost / day | $5.76 |
| Net / day | $6.27 |
| Net / month | $190.70 |
| Net / year | $2,290 |
| Margin | 51.1% |
| Breakeven electricity | $0.146/kWh |
Defaults reflect October 2026 network conditions. BTC price, hashrate and fees change constantly, so update them before relying on results.
Results update live as you type. For planning and field-check estimates — always verify against applicable standards and equipment ratings.
How we calculate this →How ASIC mining profitability is calculated
Bitcoin mining revenue is your share of the block rewards the network pays out each day. The calculation chains from your miner's hashrate to dollars in four steps.
First, your share of the network: share = (your hashrate in TH/s × 1e12) ÷ (network hashrate in EH/s × 1e18). Both convert to raw hashes per second, so a 318 TH/s miner on a 1,000 EH/s network holds about three parts in ten million of the total.
Second, gross BTC per day. The Bitcoin network produces roughly 144 blocks a day (one every 10 minutes), each paying the block subsidy plus transaction fees. gross BTC/day = share × 144 × subsidy × (1 + fee%) × uptime × quantity. The fee term folds transaction fees in as a percentage of the subsidy; uptime scales the result down for downtime, since a miner that is off earns nothing.
Third, revenue and fees in dollars. revenue/day = gross BTC/day × BTC price. The pool takes its cut as pool fee/day = revenue/day × pool fee %. Power cost is straightforward: kWh/day = (W ÷ 1000) × 24 × uptime × quantity, priced at your electricity rate. Net is what remains: net/day = revenue − pool fee − power cost.
Fourth, the two numbers that decide whether mining makes sense at your site. Margin % = net/day ÷ revenue/day shows how much of each dollar of revenue survives after costs. Breakeven electricity price = (revenue/day − pool fee/day) ÷ kWh/day is the rate at which net falls to zero — the highest $/kWh at which this miner still breaks even at today's BTC price and network conditions. It is the single most important figure for comparing sites and hosting offers, because electricity is the one input miners can actually shop for.
Frequently asked questions
What is hashprice?
Hashprice is the revenue a miner earns per terahash per day, usually quoted in $/TH/day. It is the BTC revenue side of the equation — block rewards plus fees divided by total network hashrate — and it falls as more hashrate joins the network or BTC price drops. This calculator computes your actual daily BTC revenue directly from your hashrate share rather than quoting a published hashprice, but the two are mathematically the same thing.
Why does profitability change daily?
Because every input moves. BTC price swings, the network hashrate grows as new machines ship, transaction fees rise and fall with on-chain activity, and the block subsidy halves roughly every four years. A miner that is profitable today can become unprofitable tomorrow if difficulty rises or price falls — which is why the breakeven electricity price, not today's net revenue, is the figure to plan around.
What is a good J/TH efficiency?
J/TH (joules per terahash) measures how much energy a miner uses per unit of hashrate — lower is better. The Antminer S23 Hydro at 5,349 W / 563 TH/s ≈ 9.5 J/TH is best-in-class for 2026; the air-cooled S23 at 318 TH/s and 3,498 W ≈ 11 J/TH is strong; older S19-era hardware at 25–30 J/TH is now marginal at most electricity rates. Efficiency is what survives difficulty growth — a more efficient miner stays profitable longer as the network gets harder.
Does this include hardware cost?
No. This calculator shows operating economics — revenue minus pool fees and electricity — not the capital cost of the ASICs themselves or hosting, installation, cooling, and maintenance. To recover hardware cost, divide the miner price by the net/day figure (or use the Hardware Payback with Difficulty Growth calculator when it launches, which accounts for rising difficulty over the payback period).