Fleet Diesel Displacement & CO2 Calculator
Electrifying a diesel truck swaps gallons of fuel for kilowatt-hours of electricity, and the CO2 savings depend on how clean that electricity is. This calculator compares the tailpipe diesel CO2 a truck no longer emits against the grid emissions its charging adds, per truck and across the whole fleet.
Use your utility or region's value; cleaner grids raise the benefit.
annual miles ÷ diesel MPG
per truck × number of trucks
annual miles × efficiency
per truck × number of trucks
diesel CO2 − electric CO2
per truck × number of trucks
CO2 avoided ÷ diesel CO2
Tailpipe and grid emissions only; excludes upstream fuel and vehicle manufacturing emissions.
Results update live as you type. For planning and field-check estimates — always verify against applicable standards and equipment ratings.
How we calculate this →Replacing one long-haul diesel tractor that drives 100,000 miles a year avoids about 15,400 gallons of diesel. On an average grid, that cuts CO2 by roughly half; on a cleaner grid the cut is much larger. Fifty trucks avoid about 4,100 tonnes of CO2 a year in this example. See the Carbon Emissions Calculator and the Class 8 Electric vs. Diesel Truck TCO Calculator.
How fleet diesel displacement and CO2 are calculated
This calculator compares the tailpipe CO2 a diesel truck emits against the grid emissions an electric truck adds when charging, then scales the difference across the fleet.
Diesel Avoided per Truck (gal/yr) = Annual Miles per Truck ÷ Diesel MPG; at 100,000 miles and 6.5 mpg, that is 100,000 ÷ 6.5 = 15,385 gallons a year the truck no longer burns. Diesel CO2 per Truck (tonnes/yr) = Diesel Avoided × Diesel Emission Factor (kg CO2/gal) ÷ 1,000; the EPA tailpipe emission factor for diesel is about 10.18 kg CO2/gal, so 15,385 × 10.18 ÷ 1,000 = 156.6 tonnes of CO2 a year.
Electricity Used per Truck (kWh/yr) = Annual Miles per Truck × Efficiency (kWh/mile); at 100,000 miles and 2.0 kWh/mile, that is 200,000 kWh a year. Electric CO2 per Truck (tonnes/yr) = Electricity Used × Grid Intensity (kg CO2/kWh) ÷ 1,000; at the U.S. average grid intensity of about 0.37 kg CO2/kWh, 200,000 × 0.37 ÷ 1,000 = 74.0 tonnes of CO2 a year.
CO2 Avoided per Truck (tonnes/yr) = Diesel CO2 − Electric CO2 — 156.6 − 74.0 = 82.6 tonnes avoided per truck each year. CO2 Reduction (%) = CO2 Avoided ÷ Diesel CO2 × 100, so 82.6 ÷ 156.6 × 100 = 52.8%; the reduction is not 100% because the electricity still carries grid emissions unless it comes from clean sources. Fleet totals multiply every per-truck value by the number of trucks: at 50 trucks, the fleet avoids about 4,131 tonnes of CO2 a year, displaces roughly 769,231 gallons of diesel, and adds about 10,000 MWh of electricity demand.
The grid intensity input is the single most leveraged assumption: on a clean grid (0.05 kg CO2/kWh) the same truck cuts CO2 by over 93%, while on a coal-heavy grid (0.70 kg CO2/kWh) the cut falls below 11%. Use your utility's or region's published average. Data sources: EPA tailpipe CO2 emission factor for diesel (10.18 kg CO2/gal); U.S. average grid carbon intensity (~0.37 kg CO2/kWh, EPA eGRID); U.S. DOE and NREL heavy-duty EV efficiency data. Verification: with defaults (50 trucks, 100,000 miles, 6.5 mpg, 2.0 kWh/mile, 10.18 kg CO2/gal, 0.37 kg CO2/kWh), Diesel Avoided/Truck = 15,385 gal, Electricity/Truck = 200,000 kWh, CO2 Avoided/Truck = 82.6 tonnes, Fleet CO2 Avoided = 4,131 tonnes, CO2 Reduction = 52.8%.
Frequently asked questions
Does this count upstream emissions?
No, only tailpipe diesel CO2 and grid electricity emissions.
What grid intensity should I use?
Your utility's or region's average; it varies a lot by location.
Why isn't the reduction 100%?
Electricity still carries emissions unless it is from clean sources.
Does charging time of day matter?
Yes. Cleaner hours reduce the footprint; this tool uses an annual average.