Back to Bitcoin & Crypto Mining
Bitcoin & Crypto Mining tools

ASIC Efficiency Comparison Calculator

Compare up to three Bitcoin ASICs side by side. Each miner's efficiency (J/TH), hardware cost, daily net, static payback, and breakeven electricity price are computed from the same shared network conditions, so the only thing that varies between columns is the hardware itself. The best value in each row is highlighted.

Illustrative — enter your actual quote.

Illustrative — enter your actual quote.

Illustrative — enter your actual quote.

Set a miner's hashrate to 0 to exclude it from the comparison. The shared network inputs below apply to every miner equally, so the only thing that varies between columns is the hardware.

Antminer S23
$6.27/day

static payback 760 days

Antminer S21 XP
$4.21/day

static payback 961 days

Antminer S23 Hydro
$12.50/day

static payback 676 days

MetricAntminer S23Antminer S21 XPAntminer S23 Hydro
Efficiency11.0J/TH13.5J/TH9.5J/TH
Hardware cost$4,770$4,050$8,445
Net / day$6.27$4.21$12.50
Net per TH / day$0.0197$0.0156$0.0222
Static payback760days961days676days
Breakeven electricity$0.146/kWh$0.119/kWh$0.169/kWh

Payback is static and assumes today's network hashrate. Rising difficulty extends real payback. Defaults reflect October 2026 network conditions — update BTC price, hashrate and fees before relying on results.

Planning-level estimate — not financial advice. Bitcoin mining revenue depends on volatile BTC price, network difficulty, transaction fees, pool fees, and your actual uptime and electricity cost — none of which this calculator can predict. Hardware prices are illustrative. Treat these numbers as a planning estimate and do your own research before investing in mining hardware or hosting.

Results update live as you type. For planning and field-check estimates — always verify against applicable standards and equipment ratings.

How we calculate this →

How ASIC efficiency is compared

This calculator runs the same profitability math as the ASIC Miner Profitability Calculator, but for up to three miners at once against a single set of shared network conditions — BTC price, network hashrate, block subsidy, fees, pool fee, electricity rate, and uptime. Holding the network inputs constant means the only thing that differs between columns is the hardware, so the comparison isolates what each miner brings to the table.

For each miner, efficiency (J/TH) = power draw in watts ÷ hashrate in TH/s — the joules it spends per terahash, where lower is better. Hardware cost = hashrate × price per TH. Net/day uses the standard chain: share = (TH/s × 1e12) ÷ (EH/s × 1e18); gross BTC/day = share × 144 × subsidy × (1 + fee%) × uptime; revenue = gross BTC × BTC price; net = revenue − pool fee − power cost. Net per TH/day divides that by hashrate to compare miners of different sizes on equal footing. Static payback = hardware cost ÷ net/day — how many days of today's earnings it takes to recover the hardware, with no allowance for rising difficulty. Breakeven electricity = (revenue − pool fee) ÷ kWh/day, the highest $/kWh at which this miner still breaks even.

The best value in each row is highlighted: lower is better for efficiency, hardware cost, and payback; higher is better for net/day, net per TH/day, and breakeven electricity (a higher breakeven means the miner tolerates a pricier site). The most efficient miner is not always the best buy — a cheaper, slightly less efficient machine can pay back faster at a cheap-power site, which is exactly the trade-off this side-by-side view is built to surface.

Frequently asked questions

What does J/TH mean?

J/TH (joules per terahash) is a miner's energy efficiency — how many joules of electricity it spends to compute one terahash. Lower is better: an 11 J/TH miner uses less energy per unit of work than a 20 J/TH miner, so it earns more net per terahash at any given electricity rate. It is the single most important hardware spec for long-term profitability, because efficiency — not raw hashrate — is what survives rising network difficulty.

Is lower J/TH always better?

Almost always for operating economics, but not necessarily for your total return. A more efficient miner burns less electricity per terahash and stays profitable longer as difficulty rises, so it wins on net/day, net per TH/day, and breakeven electricity. But if that efficient machine is priced at a steep premium per TH, a cheaper, slightly less efficient miner can still pay back faster at a cheap-power site — which is why this calculator shows static payback alongside efficiency rather than ranking on J/TH alone.

Should I buy the most efficient miner?

Only if the price per TH justifies it. The most efficient miner (lowest J/TH) will have the best net per TH/day and the highest breakeven electricity, but its hardware cost per TH may push static payback out further than a less efficient but cheaper unit. Compare all three columns — efficiency, net/day, and payback — against your actual electricity rate and hardware quote before deciding. At expensive power sites efficiency dominates; at very cheap power sites, upfront cost often matters more.

How does cooling type affect efficiency?

Liquid-cooled miners (like the S23 Hydro) typically achieve lower J/TH than air-cooled equivalents because they can sustain higher hashrate densities and run chips closer to their thermal optimum. But the J/TH figure here is the miner's own chip-level efficiency — it does not include the cooling plant's overhead. At scale, liquid cooling also lowers facility PUE, which improves the all-in energy cost per terahash; pair this comparison with the Data Center Cooling Load and PUE calculators to capture the facility-level impact.